to become a Tester
(updated 3/28/2006, with complimentary Accessory
(after product roll-out, incl. Accessory Bundle):
tester discount), includes
Storage Container, shipping, insurance,
& Accessory Bundle. See table
below for additional discounts.
Contact us regarding availability
of other bonus.
|The image to the left
is what you may expect of a torso with backside. It is an image of the full-body
doll, but the backside is identical in every way. We will post images of
the torso with backside at the conclusion of the test period (when we feel
we have a stable product).
Like the existing torso, the casting ends at the knees
Unlike the existing torso, there will be an anal entry.
Unlike the existing torso, there will be an embedded soft
fiberglass mesh to provide dimensional stability and avoid 1) unrealistic
distortion of the casting due to gravity against the backside, which is
no longer flat, and 2) to avoid elongation of the torso during use or
when it is picked up. Accordingly, one feature that will be lost is the
ability to stretch the torso for a long and lean look or to compress it
in order to emphasis the hips, as is possible with the existing torso
without the reinforcement.
One design objective was to keep costs below the $4500
mark, which is what a torso with backside would cost if it included a
fully articulated skeleton (which would end up being a full-body doll
without forearms or lower legs). We surpassed the goal by reducing costs
to $2900 for the one-part casting by utilizing a rudimentary "skeleton"
of soft fiberglass mesh, which greatly reduced costs due to man-hours
of labor and substantial material costs for the full skeleton, spine,
and skull. Preliminary feedback based on email inquiries led us to believe
that the full skeleton would not be a desirable feature to most customers
because of the cost.
Whether one is an "ass man" or not, having a
set of buttocks to grab during intercourse is a highly desirable feature,
whether one is on top or on the bottom. We can now provide this.
The new product offering was 4 years in development, and
we are now inviting a very limited number of beta testers prior to making
a general product roll-out announcement.
w/o eyes & wig
at our cost
at our cost
Product (shown for comparison purposes)-
Front with Head and Oral Cavity
Product Offering! For new customers who want a torso with backside-
Torso with Backside (single casting), including Storage Container*
(for those who want an integrated, one-piece torso with backside)
cost Option: Same as above, except that instead of receiving the
complimentary Accessory Bundle, you take a credit of equal amount
Crating & Shipping Option: Same
as above, except that payment for shipping and Storage Container are not
paid until right before torso ships
the Storage Container- It is used not only for shipping, but also to maintain
the original, pristine shape of the breasts over the years to come.
Bundle includes the following:
Teeth (upper and lower) $35
3-D voice track (when it is completed) $40
Total Accessories $170
is a head-on view of the new backside prototype (never mind the color):
is a side view of the new backside prototype (never mind the color):
Welcome to the Full-Torso information page. We are currently inviting
testers to participate in evaluating our new Full Torso with backside.
Priority for test candidates goes first to our past customers , and then
to new customers. If you already own a torso, call or write us for solutions
for retro-fitting a backside to your existing torso. There is an upgrade
path available to you.
We receive over 1000 emails each day, every day of the week (mostly Spam),
but what isn't Spam are emails asking about a torso with backside or full-body
doll. Inquiries about our existing torso are a fraction of that. Until
now, we have had to give people the disappointing news that what they
wanted was not available. Because it is so hard to wait for something
this cool, it was decided not even to offer hope of a forthcoming product,
since we were already under enough pressure trying to keep up with existing
torso demand, and we didn't know when we would complete development. We
have just now passed the critical point in product design and development,
and we are ready to beta test the new product. If any of this is interesting
to you, read on.
The Design Objective
The design objective of the torso with backside was to make it for less
than 75% of the cost of the full-body doll (under $4500). We did it for
35% less than the target price by utilizing a rudimentary "skeleton"
of soft fiberglass mesh, which greatly reduced costs due to a savings
in both man-hours of labor and substantial material costs for the full
skeleton, spine, ribs, and skull. As we have told many who asked in the
past, if we had put a contoured backside on our existing torso (without
a skeleton or reinforcement solution of some kind), the weight of the
gel would have caused unrealistic distortion. For instance, the head would
have flattened, widening the facial features. It was the friction from
the mattress against the flat back surface of our existing torso that
prevented this undesirable effect. We have overcome this design challenge
without sacrificing the softness or durability of the gel, which is (along
with our lifecasting process) our signature distinction, the one that
separates us from our silicone competitors.
The Invitation and Offer
Our existing customers have had a chance to decide whether to participate
in the test or wait for product roll-out in 1st quarter, 2006. Accordingly,
the invitation to testers can now be extended to a few members of the
general public. You are invited to be considered as a candidate for participation
in the Torso with Backside Test Group.
If chosen, testers who desire accessory items (wig and eyes), may purchase
these at any time at additional cost. Eyes (prosthetic quality) are $110,
and wigs start at $59 (for the blonde Farah, our best value and most popular
wig). You may simply add these items to the order form and add the additional
amount to the already discounted total listed in this offer.
Call to Action (How to assure your place as a tester)
If you wish to be considered as a candidate for this test, then advise
of this at once. We will continue to search for suitable candidates until
we have our test group, at while time participation will be closed. We
are limiting participation in this test to only a few participants (as
opposed to past tests), and if we need more testers later to refine some
nuance of the production process, we will make a separate announcement.
In order to be considered for inclusion in the test group, candidates
must meet the following requirements:
- Testers must be
able to place an order (at the discount stated in the pricing list)
- Testers must be
willing to provide honest, detailed, and accurate feedback on their
impression of the product being tested (one page with 6 questions is
our typical questionnaire)
- Testers agree to
allow us to quote them (anonymously, of course)
- Testers agree to
become members of the Doll Forum (it's free), as a means of sharing
information with non-testers. Participation in online discussions is
We can evaluate your request for inclusion either by email
or by phone in most cases (unless we are waiting to hear back from someone
ahead of you). Afternoon, Pacific Standard Time is the best time to call.
Thank you for your time in evaluating this invitation.
Please feel free to call or write if you have questions, and we will send
you a more detailed version of the above invitation, including pertinent
instructions for what to do to become a tester.
With warm regards,
Kyle Bronson, VP Operations
Toll-free Phone: 866-8CYBORG
to Torso Front Gallery